January 19, 2026 | updated: November 16, 2026

Alabama State Coverage

< 1 min read

Drivers in Alabama can use Fleetworthy Weigh Station Bypass (formerly Drivewyze) at 1 covered site. Alerts arrive on the ELD or telematics device already in your cab. No transponder required.

1
covered bypass site in Alabama

Alabama Weigh Station Site Coverage List

Site
Site Type
Heflin I-20 WB
Fixed

How it works

Your device is ready. Fleetworthy Weigh Station Bypass runs on the ELD or telematics device already in your cab. There is no transponder to install, carry or maintain in your truck.

You get an alert. As you approach a covered Alabama site, the device delivers a bypass or pull-in notice before the site, so you know what to expect as you drive.

Compliant fleets move on. Bypass is based on your safety and credential records and the rules of each state. A clean record means fewer stops. When bypass is not offered, you get pull-in instructions.

Alabama weigh station bypass FAQ

Which Alabama weigh stations support Fleetworthy Weigh Station Bypass?

Fleetworthy Weigh Station Bypass covers 1 bypass site in Alabama. It is a fixed site. The full list is in the coverage table on this page.

What counts as a bypass site on the Alabama coverage list?

A bypass site is a weigh station or inspection location where Fleetworthy Weigh Station Bypass delivers a bypass or pull-in notice. Where a location has coverage in more than one direction of travel, each direction can be listed as its own site. The full list is in the coverage table on this page.

Do I need to install a transponder to get bypass in Alabama?

No. Fleetworthy Weigh Station Bypass runs on the ELD or telematics device already in your cab, so there is no transponder to install, carry or maintain. When you approach a covered Alabama site, the device delivers the bypass or pull-in notice. Most fleets use the device they already have. If you are not sure your device works, our team will confirm it for you.

Will every truck that approaches a covered Alabama site get a bypass?

No. Bypass decisions are based on your safety and credential records and the rules of each state. When a bypass is not offered, the device gives you pull-in instructions instead. Always follow posted signs and officer direction at every weigh station, whatever your device shows. Keeping your safety and credential records current helps you earn more bypasses.

What types of bypass sites are on the Alabama coverage list?

Alabama has 1 site on the coverage list. It is a fixed site. Fixed sites are permanent weigh stations. Mobile sites are inspection sites that enforcement sets up outside a permanent facility. The type is shown for each site in the coverage table on this page.

How do I get started with weigh station bypass in Alabama?

Choose Get started and our team will confirm that your ELD or telematics provider works with Fleetworthy Weigh Station Bypass. Most fleets use the device they already have. Once your device is confirmed, you will get alerts at the covered Alabama sites. You can start from the Get started button on this page.

Alabama Toll Roads

Alabama toll roads, like the Alabama Expressway, connect your truck and service fleets to northern neighbors without the hassle of interstate congestion. Although toll roads in the region are convenient, they contribute to your business’s expenses. All-in-one software from Fleetworthy provides data to optimize your routes and toll discounts while eliminating manual payment processes.

Frequently Asked Questions About Toll Roads in Alabama

Reducing Alabama toll road costs takes strategy and information. Here are frequently asked questions and answers to help you make sound decisions about the best toll payment and management solutions for your fleet.

How Can You Pay for Toll Roads in Alabama?

Your truck or service vehicle fleet can pay Alabama tolls using a compatible pass or cash. The Beach Express also offers toll-plate payments where you receive an invoice by mail. The Montgomery Expressway accepts credit card payments.

Commercial companies can leverage transponder-based systems to pay with Fleetworthy software.

How Much Do Toll Roads in Alabama Cost?

Alabama toll costs depend on how many axles your fleet vehicle or truck has. Commercial vehicles can expect to pay:

  • $3 for two axles
  • $3.50 for three axles
  • $4 for four axles
  • $4 plus $0.50 for each axle over four

These rates can change depending on the method you use to pay.

Where are Toll Roads Located in Alabama?

Toll facilities in Alabama include:

  • Tuscaloosa By-Pass (Tuscaloosa, AL)
  • Montgomery Expressway (Millbrook, AL)
  • Emerald Mountain Expressway (Wetumpka, AL)
Does Alabama Take E-ZPass?

No. Alabama does not support E-ZPass. It is not integrated into the E-ZPass system, meaning E-ZPass transponders are not compatible in Alabama. To pay tolls in Alabama, you can use cash or a Freedom Pass card.

If you’re an owner-operator or commercial fleet manager traveling in Alabama and California, the Horizon Pass is the best transponder option for your needs.

What Happens if You Fail to Pay Alabama Toll Fees?

If you are leveraging a generic Alabama toll road pass system and your funds are insufficient when going through a toll gantry, you will receive an invoice via mail. This invoice will have the toll amount plus administrative fees tacked on. If you fail to pay your toll fees, you will incur fines, and your vehicle’s registration may be suspended.

The Fleetworthy system is unique. Our team manages your systems and devices so your transponders won’t run out of funds. You can also track your fleet’s individual vehicles to see device status and prepaid amount, offering complete transparency.

Is Using an Alabama Toll Pass More Cost-Effective?

Leveraging the Fleetworthy system is more affordable than using toll-by-plate methods or cash. We access discounted prices for commercial clients.

Can Your Truck or Service Fleet Company Put Plates on File?

Your truck and service fleet company cannot put plates on file with tolling authorities. You can partner with Fleetworthy to benefit from plate-on-file functionality. We have the authorization to place plates on file, so if the toll gantry misreads your transponder device or pass, we’ll have your plates on file to process toll fees, saving you violation costs and admin.

Streamline Your Fleet’s Toll Road Costs and Administration Tasks With Fleetworthy

You spend considerable time trying to manage your toll road costs and avoid penalties. Despite your team’s best efforts, you cannot access relevant data and stay on top of invoices coming in. Fleetworthy offers a one-platform, one-partnership solution to simplify truck and fleet toll management. Get an instant overview of toll amounts per vehicle, gantry costs and data to help you optimize your routes. Leverage the software to eliminate manual processing and payments and minimize violations.

Save time and money and make toll management frictionless with one intuitive solution: contact us online.

See What Fleetworthy Can Do for You